Name: QU10183 GM C-Truck 35 Spline NV4500 1410 Series Rear Output Yoke with Dampener
SKU: SK0133822-A
Availability: InStock

Description

QU10183 GM C-Truck 35 Spline NV4500 Transmission 1410 Series Rear Output Yoke with Dampener for Spicer 1410 series universal joint. These genuine New Venture original equipment yokes feature an integral balanced vibration dampener and fit fixed rear yoke type, 1992-2007 GM 4×2 MT8 or MW3 NV4500 5 Speed Manual Transmissions in C2500 and C3500 conventional pickups without transmission mounted parking brakes. New or new takeoff yokes may have some slight surface rust yoke casting from long storage.

Also See: QU30094 1410 Series Fixed Yoke without Dampener

Need More Info? Use the handy Links below to access over 40 years of Dan’s product and vehicle specific Tech Notes to easily get the information you need for your vehicle’s repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Specs
NV4500 Tools
Matching Parts
Applications

Tech Note 1: U-Joint Specs
QU10183 is made to accept universal joints made to Spicer 1410 series dimensional specifications. U-Joint cup diameter is 1-3/16″. Overall width of installed universal joint is 4-3/16″. Use with TK40705 or QU40789 universal joints.

Tech Note 2: NV4500 Tools
Need Exploded Views, Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.

You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.

TOOLS for SPECIFIC NV4500 MODELS
Component	23 Spline Dodge 4×4 NV4500LD	29 Spline Dodge 4×4 NV4500HD	30 Spline Dodge 4×2 NV4500LD	31 Spline Dodge 4×2 NV4500HD	32 Spline GM 4×4	35 Spline GM 4×2
Mainshaft Nut	QT2002	QT2001 QT2036	QT2002	QT2001 QT2036	QT2002 QT2028	1-1/2″ Hex Socket
Mainshaft Holding	NLA	QT2000	NLA	QT2011	N/A	N/A
5th Gear Nut Torx® Cross Bolt	N/A	QT9205	N/A	QT9205	N/A	N/A
Output Seal Installer	N/A	QT1801	N/A	QT2058 CALL	Not Used	Not Used
Tailshaft Bushing Remover and Installer	Not Used	Not Used	Not Used	QT2044	Not Used	Not Used
TOOLS For ALL NV4500 MODELS
Countershaft Front Bearing Cup Installer	QT1802	Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4×4 Rear Output Seal
Countershaft Front Bearing Installer	QT2004	Can also use to press 3-4 Synchro Hub on original equipment mainshafts
Input Bearing & Countershaft Rear Bearing Installer	QT2005	Can also use to install Input Seal
Input Bearing Cup Installer	QT1801	Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
Countershaft Support	QT2006	Use to support front of countersahft when installing countershaft rear bearing
1-2 Synchronizer Support	QT2008	Use to support 1-2 synchronizer hub during synchronizer assembly
10mm 1/2″ Drive 12 Point Socket	QT1020	USA Made Impact Socket for Factory Tailshaft Housing Bolts
Long Shank Punch for Shift Lug	QT9300	3/16″ x 8″ Shank for 5th Gear Shift Lug Roll Pin

Tech Note 3: Matching Parts
Matching Parts for QU10183 1410 Series Dampened NV4500 Rear Output Yoke:
QU10720 4×2 NV4500 Transmission Rear Output Seal
QU30009 Internal Spline Seal
QU30095 Yoke Washer (fits between Yoke and Nut)
QU10181 Yoke Nut
QK3112 U-Joint Strap and Bolt Kit
QU10177 Mainshaft Bearing Spacer
QU10719 4×2 Transmission Mainshaft (Rear Output Shaft)
TK40705 or QU40789 Universal Joints
QU10727 Dampened 1350 Series Output Yoke
QU10184 1350 Series Output Yoke
QU30094 1410 Series Output Yoke

Applications
Chevy and GMC:
C2500, C3500 with NV4500 5 Speed: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
C2500, C3500, Standard and HD Pickup based models with NV4500 5 Speed: 2000, 2001, 2002, 2003, 2004, 2005, 2006
C2500 Silverado Classic and Sierra Classic with NV4500 5 Speed: 2007